| |
|
|
|
 |
1/4 Pint (4 Oz) Touch-up Spray Gun |
| Efficient, accurate, and versatile |
This portable touch-up gun offers a highly controlled spray pattern for pinpoint accuracy, reducing wasted gel coat and harmful emissions. Its small size, minimal air consumption, and easy clean-up makes it the perfect choice for on-site repairs. This gun comes fitted with a 2.0mm nozzle, which is ideal for any of our gel coats. But don’t use it just for repairs; it’s also great for spraying PVA! Ships complete with 1/4 pint cup, cleaning brush, and 1 mini filter.
View 123-A Replacement Parts
Pressure required – 30-80 psi
Air consumption – 160-300 liter/minute
Compressor required – 1 HP
Air connection - 1/4” n.p.t.
Dry weight - .75 lbs
|
|
|
 |
.6 Liter (20 Oz) Touch Up Spray Gun |
| Professional Grade |
This is a heavy duty gun offering a range of adjustments that will allow the spray pattern to be customized to the specific project. This gun excels at large surface spraying, such as new mold construction, composite refinishing and large boat repair. This gun comes fitted with a 2.5mm nozzle, which is ideal for any of our gel coats. Ships complete with 1.25 pint cup, cleaning brush, and 1 mini filter.
View 126-A Replacement Parts
Pressure required – 40-80 psi
Air consumption – 4.7-7.1 CFM
Compressor required – 1.5 HP
Air connection - 1/4” NPT
Dry weight – 1.55 LBS
|
|
|
 |
Gel Coat Cup Gun |
| Gel Coat Won't Catalyze Inside The Gun |
An inexpensive gel coat gun for spraying small to medium size molds. Avoids the high cost of catalyst injector systems and at the same time avoids the pitfalls of a regular spray gun. The resin and catalyst are mixed in the disposable paper cups, the lid and nozzle assembly are pressed on, and the cup is then placed on the gun. With the paper cup in a level position, depress the trigger and the air stream picks up the gel coat and provides a uniform, high velocity spray pattern. To clean up, merely remove the cup form the gun, and just clean the lid and nozzle. Cup capacity is one quart. We ship the gun with a 3/16" ID nozzle, but others are available.
View 120-A Replacement Parts
Pressure required –60 - 100 psi
Air consumption – 5.8 CFM at 80 psi
Compressor required – 5 HP
Air connection - 1/4" TPR
Dry weight – 2.0 lbs
|
|
|
 |
Preval Sprayer |
| |
| This portable sprayer is perfect for misting coats of PVA Release Film
over waxed mold surfaces. Use this versatile applicator for all kinds of liquids. Great economical alternative to other air-powered spray guns. |
|
|
 |
Spray Gun Stand |
| |
| Made to hold our 126-A Touch Up Spray Gun. Provides hands-free assistance when pouring resin or gel coats. Can mount to the wall or to a table. |
|
|
 |
Cup Gun Brush |
| Perfect for Fluid Nozzles |
| This simple tool will keep your gun spraying like new for years to come. It fits easily into the fluid nozzle to clean out any remaining gel coat. Speeds cleaning and color changes. |
|
|
 |
Cups for Spray Guns |
| |
#121, 1 Quart Reusable Plastic Tubs
Graduated for Easy Measuring
These plastic tubs will permit resin to stand without breaking down and permit acetone clean up. Ideal for cup gun applications where one cup after another is to be used.
#887, 1 Quart Disposable Paper Tubs
These disposable cups fit snugly on the gel coat cup gun and save messy clean up. |
|
|
 |
Small Regulator / Filter |
| Keep Moisture Out and Control Your Pressure |
This compact Regulator/Filter is a great size for a small workshop or garage. This unit is designed to filter your air to keep debris and liquids from getting inside your equipment. Additionally, it permits you to dial in and maintain the correct air pressure. Install the Regulator/Filter in your line close to your air source to filter out any moisture or debris. Includes poly cup for debris containment which can then be thrown away. This unit can be used on our #2229-A or #1148-A Vacuum Generators, any of our Gel Coat Spray Guns and our #171-A Chopper Gun. Max PSI 150.
Connection to our #171 Chopper Gun and #120 Gel Coat Cup Gun requires a #2222 Male Nipple. Connection to our #123 or #126 Gel Coat Touch Up Guns require a #2223-A Female Nipple. |
|
|
 |
Large Regulator / Filter |
| Industrial Environment Moisture Containment and Pressure Control |
This industrial style Regulator/Filter has a larger filter than our #2215-A and includes a metal shield to protect the polycarbonate cup. A thumb screw at the bottom allows for easy draining of any liquids that accumulate in the cup. . Install this Regulator/Filter in your line close to your air source to filter out any moisture or debris as well as to dial in and maintain your air pressure. This unit can be used on our #2229-A or #1148-A Vacuum Generators, any of our Gel Coat Spray Guns and our #171-A Chopper Gun. Max PSI 150.
Connection to our #171 Chopper Gun, #120 or #836 Gel Coat Spray Guns require a #2222 Male Nipple. Connection to our #123 or #126 Gel Coat Touch Up Guns require a #2223-A Female Nipple.
|
|
|
 |
Air Hose Assemblies |
| Fitted to Easily Connect |
| Our industrial quality air hoses have been prefitted with ¼” quick disconnect fittings to easily plug into your air source, our #2229-A or #1148-A Vacuum Generators, our #2215-A or #2216- A Regulator/Filters, any of our Gel Coat Spray Guns and our #171-A Chopper Gun. However, additional fittings are required for the following: Connection to our #171 Chopper Gun, #120 or #836 Gel Coat Spray Guns require a #2222-A Male Nipple. Connection to our #123 or #126 Gel Coat Touch Up Guns require a #2223-A Female Nipple. Simply snap in the hose and you will be ready to go. This high quality hose is suitable for daily use in a general industrial environment and will not degrade under moderate contact with oils or resins.
|
|
|
 |
Plumbers Tape |
| |
| #2225-A Plumber’s Tape should be used for all brass fittings and threads to ensure a leak proof joint. |
|
|
 |
Quick Disconnect & Nipples |
| Connect Vacuum Components or Spray Equipment in a Snap |
This Quick Disconnect and the Male and Female Nipples can be used to turn setup and tear downs into a quick and convenient task. Setup of vacuum applications is significantly easier because all vacuum hose can be added at the last minute allowing more focus on the laminate itself. Some vacuum bagging applications will also benefit from the #2220 Brass Barb Fitting to quickly thread vacuum components turning your entire vacuum line into an easy quick disconnect operations.
For spray and chopper applications, our air hoses are already supplied with a quick disconnect fitting but require a nipple to attach to the gun. Connection to our #171 Chopper Gun, #120 or #836 Gel Coat Spray Guns require a #2222-A Male Nipple. Connection to our #123 or #126 Gel Coat Touch Up Guns require a #2223-A Female Nipple.
|
|
|
|
|
First
Quality
Help
Area 
