| |
|
|
|
 |
Microplane® 3” Snap-In Tool |
| Super Smooth |
Razor-sharp, stainless steel Microplanes® are for rapid smoothing and shaping of the foam. The handle has been designed with an open back that allows the shavings to fall out instead of packing up behind the razor sharp teeth. This allows for gentle sculpting with out jagged jumps.
This tool is very easy to use and has several blade options. The flat, course blade is the most common and is supplied with a handle. The other blades are easy to change but additional handles are available. Changing the blades is easy, just firmly snap the blade out and then back in. |
|
|
 |
Microplane® 8” Snap-In Tool |
| Smooth Out Large Sections |
| This tool is an 8” version of the stainless steel Microplane® Snap-In Tool shown above. Like the 3” tool, the flat, course blade is supplied with a handle and the other blades can easily be changed. Additional handles are available. |
|
|
 |
Irwin® ProTouchTM Coping Saw |
| For The Round Cuts |
| This is a professional grade coping saw that gives you the ability to cut virtually any shape or pattern. This saw has two different blade options which allow the user to choose the type of cut needed. The 2130 comes with a handle and coarse blade. Blade length 6 ½ inches and frame depth 5 ½ inches. The 2131
Course Replacement Blades have 17 yeeth per Inch and the 2132 Fine Replacement Blades have 21 teeth per Inch.
|
|
|
 |
X-ACTO® Extra Fine Saw Blade |
| Delicate Thin Cuts |
| This is a great saw for cutting very fine skim cuts. The design of this tool also allows the user to make square cuts with ease. The blade is 5 ½” long, 1 ¼ deep, with 52 teeth per inch, and is 12 thousandths thick. Handle 2106 is required and is not included. |
|
|
 |
Irwin® Detail/Dovetail Saw |
| Perfect For Small Cuts |
| This is a perfect sized saw that can be used to cut out very small sections. Use this saw to clean up areas that the larger saw may not have been able to cut. The saw blade has 22 teeth per inch, which allows the blade to cut very thin sections. Blade length is 7 ¼ inches.
|
|
|
 |
Irwin® Double Edge Saw |
| Irwin® Versatility |
| The Irwin® Double Edge Saw is equipped with two different blade designs all in one blade. On one side you have 7 teeth per inch, which allows for a very rough cut. The other side has 17 teeth per inch, which will give you a smoother cut. The handle disassembles in seconds for easy storage. Blade length is 9 ½ inches.
|
|
|
 |
Irwin® 12 Inch Pull Saw |
| All Purpose Saw |
| The Irwin® 12 inch saw is a Japanese-style pull saw which gives the user better control, cleaner cuts, and requires less effort to execute the cut. The saw disassembles in seconds for easy storage and has ergonomically designed handle. Blade length is 12 inches and blade has 14 teeth per inch.
|
|
|
 |
OLFA® Heavy Duty Circle Cuttter |
| Cut Circles with Ease |
| The Olfa heavy-duty circle cutters have an adjustable point in the middle, which gives the cutter the versatility to cut circles in the range of 3” to 12”. It also has a snap-off blade design, so that you can save time on changing blades. One blade (6 edges) is included.
|
|
|
 |
Super 77 and High-Strength 90 Spray Adhesive |
| Temporary and Permanent Bonding |
We have done some serious testing and have found these two adhesives to work perfectly with the foam. In the event you make a mistake, simply cut out a 90° degree piece and glue in another piece with 3M® Super 77. This adhesive is strong but is repositionable for several days allowing you to get the corrected piece sculpted into shape. After the shape is perfected, permanently affix it with the 3M® High-Strength 90. The High-Strength 90 will form a permanent bond with the foam after a 24 hour cure time.
These adhesives can also be used to adhere sheets together or blocks to blocks. Additionally, Super 77 created a minimal bond line compared to any other adhesive – necessary for sanding two sections together. The Super 77 contains 24 ounces and the High-Strength 90 contains 17 ounces.
|
|
|
|
|
First
Quality
Help
Area 
